Challenge MS 10A Paper Drill

Description

FEATURES
- High Production Multi-Hole Drilling
- Drills Up To 10 Holes in One Stroke
- Maximum Drill Bit Diameter 1/2"
- 2-1/2" Drilling Capacity
- Powerful Hydraulic Operation
- Easy Head Adjustment
- Variable Speed Stroke Control
- Automatic Paper Chip Removal
- Rugged Cast Iron Construction
- Flexible Side Guide Adjustments
- Multi-Splined Drive Shaft
- Backgauge Adjustments
- Lighted Work Surface
SPECIFICATIONS
Maximum Number of Drill Heads
10 Heads
Drill Sizes Available** (2" capacity)
1/8" to 1/2" / 3 to 13 mm
Drill Sizes Available (2-1/2" capacity)
1/4" to 1/2" / 6 to 13 mm
Center to Center Distance Maximum
21" / 53 cm
Center to Center Distance Minimum***
1-1/4" / 3.2 cm
Minimum Distance Between Holes w/ Adj. Stops
3/8" / 9.5 cm
Minimum Distance Between Holes w/ Fixed Gauges
1/4" / 6 mm
Maximum Drilling Capacity
2-1/2" / 6.35 cm
Strokes per Minute (adjustable)
18 to 26
Backgauge Adjustment
0 to 9" / 0 to 23 cm
Vertical Adjustment of Individual Heads
1/4" / 6 mm
DIMENSIONS
Table Size
24" x 36" / 61 x 91 cm
Table Height
38" / 96.5 cm
Overall Height
60" / 152 cm
Floor Space Needed
35" x 40" / 89 x 102 cm
Net Weight (approximate)
1350 lbs / 675 kg
Shipping Weight (approximate)
1660 lbs / 830 kg
ELECTRICAL
Standard -
3 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP.
208 Volts, 14 Amps (service size 20 Amps) or
230 Volts, 12.8 Amps (service size 20 Amps) or
460 Volts, 6.6 Amps (service size 15 Amps)
Optional -
1 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP
208 Volts, 26.5 Amps (service size 40 Amps) or
230 Volts, 24.2 Amps (service size 40 Amps)